Skip to content

Latest commit

 

History

History
217 lines (144 loc) · 7.88 KB

cpt-shrinkwrap.rst

File metadata and controls

217 lines (144 loc) · 7.88 KB

CernVM-FS Shrinkwrap Utility

The CernVM-FS Shrinkwrap utility provides a means of exporting CVMFS repositories. These exports may consist of the complete repository or contain a curated subset of the repository.

The CernVM-FS shrinkwrap utility uses libcvmfs to export repositories to a POSIX file tree. This file tree can then be packaged and exported in several ways, such as SquashFS, Docker layers, or TAR file. The cvmfs_shrinkwrap utility supports multithreaded copying to increase throughput and a file specification to create a subset of a repository.

Installation

The cvmfs_shrinkwrap utility is packaged for Red Hat based and Debian based platforms in the cvmfs-shrinkwrap package.

In order to compile cvmfs_shrinkwrap from sources, use the -DBUILD_SHRINKWRAP=on cmake option.

CernVM-FS Shrinkwrap Layout

The structure used in the Shrinkwrap output mirrors that used internally by CernVM-FS. The visible files are hard linked to a hidden data directory. By default, cvmfs_shrinkwrap builds in a base directory (/tmp/cvmfs) where a directory exists for each repository and a .data directory containing the content-addressed files for deduplication.

The shrinkwrap output directory should be formatted with XFS. The ext file systems limit the number of hard links to 64k.

File Path Description
/tmp/cvmfs Default base directory Single mount point that can be used to package repositories, containing both the directory tree and the data directory.
<base>/<fqrn> Repository file tree Directory containing the visible structure and file names for a repository.
<base>/.data File storage location for repositories Content-addressed files in a hidden directory.
<base>/.provenance Storage location for provenance Hidden directory that stores the provenance information, including libcvmfs configurations and specification files.

Specification File

The specification file allows for both positive entries and exclusion statements. Inclusion can be specified directly for each file, can use wildcards for directories trees, and an anchor to limit to only the specified directory. Directly specify file :

/lcg/releases/gcc/7.1.0/x86_64-centos7/setup.sh

Specify directory tree :

/lcg/releases/ROOT/6.10.04-4c60e/x86_64-cenots7-gcc7-opt/*

Specify only directory contents :

^/lcg/releases/*

Negative entries will be left out of the traversal :

!/lcg/releases/uuid

Creating an image for ROOT

Start out with either building cvmfs_shrinkwrap, adding it to your path, or locating it in your working directory.

Create a file specification to limit the files subject to being shrinkwrapped. Here is an example for ROOT version 6.10 (~8.3 GB). For our example put this in a file named sft.cern.ch.spec.

/lcg/releases/ROOT/6.10.04-4c60e/x86_64-centos7-gcc7-opt/*
/lcg/contrib/binutils/2.28/x86_64-centos7/lib/*
/lcg/contrib/gcc/*
/lcg/releases/gcc/*
/lcg/releases/lcgenv/*

Write the libcvmfs configuration file that will be used for cvmfs_shrinkwrap.

Warning

cvmfs_shrinkwrap puts heavy load on servers. DO NOT configure it to read from production Stratum 1s!

To use cvmfs_shrinkwrap at CERN please use http://cvmfs-stratum-zero-hpc.cern.ch, and for OSG please use http://cvmfs-s1goc.opensciencegrid.org:8001.

Here is an example that uses the CERN server, written to sft.cern.ch.config.

CVMFS_REPOSITORIES=sft.cern.ch
CVMFS_REPOSITORY_NAME=sft.cern.ch
CVMFS_CONFIG_REPOSITORY=cvmfs-config.cern.ch
CVMFS_SERVER_URL='http://cvmfs-stratum-zero-hpc.cern.ch/cvmfs/sft.cern.ch'
CVMFS_HTTP_PROXY=DIRECT # Avoid filling up any local squid's cache
CVMFS_CACHE_BASE=/var/lib/cvmfs/shrinkwrap
CVMFS_KEYS_DIR=/etc/cvmfs/keys/cern.ch # Need to be provided for shrinkwrap
CVMFS_SHARED_CACHE=no # Important as libcvmfs does not support shared caches
CVMFS_USER=cvmfs

Note

Keys will need to be provided. The location in this configuration is the default used for CVMFS with FUSE.

Using the cvmfs repository sft.cern.ch :

sudo cvmfs_shrinkwrap -r sft.cern.ch -f sft.cern.ch.config -t sft.cern.ch.spec --dest-base /tmp/cvmfs -j 16

Creating an image in user space

Start by using the above setup.

Alternatively, shrinkwrap images can be created in user space. This is achieved using the UID and GID mapping feature of libcvmfs. First mapping files need to be written.

Example (Assuming UID 1000). Write * 1000 into uid.map at /tmp/cvmfs. Add this rule sft.cern.ch.config. :

CVMFS_UID_MAP=/tmp/cvmfs/uid.map

The same is done with GID into gid.map.

Using the cvmfs repository sft.cern.ch :

cvmfs_shrinkwrap -r sft.cern.ch -f sft.cern.ch.config -t sft.cern.ch.spec --dest-base /tmp/cvmfs -j 16

Note on CernVM-FS Variant Symlinks

CernVM-FS variant symlinks that are used in the organization of repositories are evaluated at the time of image creation. As such, the OS the image is created on should be the expected OS the image will be used with. Specification rules can be written to include other OS compatible version, but symlinks will resolve to the original OS.

Using a shrinkwrap image

Shrinkwrap was developed to address similar restrictions as the CVMFS Preloader. Having created an image from your specification there are a number of ways this can be used and moved around.

Exporting image

Having a fully loaded repository, including the hard linked data, the image can be exported to a number of different formats and packages. Some examples of this could be ZIP, tarballs, or squashfs. The recommendation is to use squashfs as it provides a great amount of portability and is supported for directly mounting on most OS.

If tools for creating squashfs are not already available try :

apt-get install squashfs-tools

-- or --

yum install squashfs-tools

After this has been installed a squashfs image can be created using the above image :

mksquashfs /tmp/cvmfs root-sft-image.sqsh

This process may take time to create depending on the size of the shrinkwrapped image. The squashfs image can now be moved around and mounted using :

mount -t squashfs /PATH/TO/IMAGE/root-sft-image.sqsh /cvmfs

Bind mounting an image

The shrinkwrap image can also be directly moved and mounted using bind mounts.

mount --bind /tmp/cvmfs /cvmfs

This provides a quick method for testing created images and verifying the contents will run your expected workload.

Important note on use

Shrinkwrap images mirror the data organization of CVMFS. As such it is important that the data and the file system tree be co-located in the file system/mountpoint. If the data is separated from the file system tree you are likely to encounter an error.