A3COM-HUAWEI-IP-ADDRESS-MIB

-- ====================================================================
-- Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: IPv4 address MIB
-- Reference:
-- Version: V1.5
-- History:
--   V1.0 2005-11-22 Created by Wang Hui and Liu Jinguang
--        Initial version
--   V1.1 2006-03-16 Modify by Yu Hongqiang
--        Modify the description of some objects.
--   V1.2 2007-12-18 Modify by Zhangyinfei
--        Add enmu 'vrrp' for h3cIpAddrReadSourceType and h3cIpAddrReadCatalog
--   V1.3 2009-8-11 Modify by lifei
--        Add ip address change notify trap
--   V1.4 2010-03-06 Modify by Jianzhuang Ge
--        Add ipv4 address management table h3cIpv4AddrTable
--   V1.5 2011-11-28 Modify by zhangshuai
--        Add h3cIpAddrFirstTrapTime
-- ====================================================================
A3COM-HUAWEI-IP-ADDRESS-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        h3cCommon
            FROM A3COM-HUAWEI-OID-MIB
        Integer32, IpAddress, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
        TimeTicks
            FROM SNMPv2-SMI
        RowStatus
            FROM SNMPv2-TC
        InetAddressType,InetAddress
            FROM INET-ADDRESS-MIB
        ifIndex
            FROM IF-MIB;

    h3cIpAddrMIB MODULE-IDENTITY
        LAST-UPDATED "200511220000Z"
        ORGANIZATION
            "H3C Technologies Co., Ltd."
        CONTACT-INFO
            "Platform Team H3C Technologies Co., Ltd.
            Hai-Dian District Beijing P.R. China
            http://www.h3c.com
            Zip:100085
            "
        DESCRIPTION
            "The MIB module for managing IPv4 address."
        REVISION "200511220000Z"
        DESCRIPTION
            "The initial revision of this MIB module."
        ::= { h3cCommon 67 }


--
-- Node definitions
--
    h3cIpAddressObjects OBJECT IDENTIFIER ::= { h3cIpAddrMIB 1 }

    h3cIpAddressConfig OBJECT IDENTIFIER ::= { h3cIpAddressObjects 1 }

    h3cIpAddrSetTable OBJECT-TYPE
        SYNTAX SEQUENCE OF H3cIpAddrSetEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The table of address information is relevant to this
            entity's IPv4 addresses for setting. The address information
            that can be read and set in this table is a subset of the
            address information that can be read in h3cIpAddrReadTable
            and ipAddrTable in IP-MIB. This table is used to configure IPv4
            addresses of an interface identified by h3cIpAddrSetIfIndex.
            When users create or delete an entry in this table, the agent also
            increases or reduces a corresponding entry in the
            h3cIpAddrReadTable and ipAddrTable in IP-MIB.
            When an interface which has been assigned IPv6 address is deleted,
            the agent also deletes the entry corresponding to the interface
            in this table and h3cIpAddrReadTable.
            All IPv4 addresses in this table will also show in ipAddrTable in
            IP-MIB.
            "
        REFERENCE
            "RFC 2011"
        ::= { h3cIpAddressConfig 1 }

    h3cIpAddrSetEntry OBJECT-TYPE
        SYNTAX H3cIpAddrSetEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Define the IPv4 address information.
            "
        INDEX { h3cIpAddrSetIfIndex, h3cIpAddrSetAddrType, h3cIpAddrSetAddr }
        ::= { h3cIpAddrSetTable 1 }

    H3cIpAddrSetEntry ::=
        SEQUENCE
        {
            h3cIpAddrSetIfIndex
                Integer32,
            h3cIpAddrSetAddrType
                InetAddressType,
            h3cIpAddrSetAddr
                InetAddress,
            h3cIpAddrSetMask
                IpAddress,
            h3cIpAddrSetSourceType
                INTEGER,
            h3cIpAddrSetCatalog
                INTEGER,
            h3cIpAddrSetRowStatus
                RowStatus
        }

    h3cIpAddrSetIfIndex OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The index value which uniquely identifies the interface to
            which this entry is applicable. The interface identified by
            a particular value of this index is the same interface as
            identified by the same value of RFC 1573's ifIndex.
            "
        ::= { h3cIpAddrSetEntry 1 }

    h3cIpAddrSetAddrType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IP address type to which this entry's address information
            pertains. The value must be ipv4.
            "
        ::= { h3cIpAddrSetEntry 2 }

    h3cIpAddrSetAddr OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPv4 address to which this entry's address information
            pertains.
            "
        ::= { h3cIpAddrSetEntry 3 }

    h3cIpAddrSetMask OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The subnet mask associated with the IPv4 address of this
            entry. The value of the mask is an IPv4 address with all the
            network bits set to 1 and all the hosts bits set to 0.
            "
        ::= { h3cIpAddrSetEntry 4 }

    h3cIpAddrSetSourceType OBJECT-TYPE
        SYNTAX INTEGER
        {
            assignedIp(1)
        }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Indicate the type of source of the IPv4 address."
        DEFVAL { assignedIp }
        ::= { h3cIpAddrSetEntry 5 }

    h3cIpAddrSetCatalog OBJECT-TYPE
        SYNTAX INTEGER
        {
            primary(1),
            sub(2)
        }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Indicate the category of the IPv4 address."
        DEFVAL { primary }
        ::= { h3cIpAddrSetEntry 6 }

    h3cIpAddrSetRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to create a new row or delete an
            existing row in this table, only support active,
            createAndGo and destroy.
            "
        ::= { h3cIpAddrSetEntry 7 }

    h3cIpAddrReadTable OBJECT-TYPE
        SYNTAX SEQUENCE OF H3cIpAddrReadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The table of address information is relevant to this
            entity's IP addresses for reading. This is the extension
            of the ipAddrTable in IP-MIB.
            All IPv4 addresses in this table will also show in ipAddrTable
            in IP-MIB.
            "
        REFERENCE
            "RFC 2011"
        ::= { h3cIpAddressConfig 2 }

    h3cIpAddrReadEntry OBJECT-TYPE
        SYNTAX H3cIpAddrReadEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Define the IPv4 address information.
            "
        INDEX { h3cIpAddrReadIfIndex, h3cIpAddrReadAddrType, h3cIpAddrReadAddr }
        ::= { h3cIpAddrReadTable 1 }

    H3cIpAddrReadEntry ::=
        SEQUENCE
        {
            h3cIpAddrReadIfIndex
                Integer32,
            h3cIpAddrReadAddrType
                InetAddressType,
            h3cIpAddrReadAddr
                InetAddress,
            h3cIpAddrReadMask
                IpAddress,
            h3cIpAddrReadSourceType
                INTEGER,
            h3cIpAddrReadCatalog
                INTEGER
        }

    h3cIpAddrReadIfIndex OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The index value which uniquely identifies the interface to
            which this entry is applicable. The interface identified by
            a particular value of this index is the same interface as
            identified by the same value of RFC 1573's ifIndex.
            "
        ::= { h3cIpAddrReadEntry 1 }

    h3cIpAddrReadAddrType OBJECT-TYPE
        SYNTAX InetAddressType
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IP address type to which this entry's address information
            pertains. The value must be ipv4.
            "
        ::= { h3cIpAddrReadEntry 2 }

    h3cIpAddrReadAddr OBJECT-TYPE
        SYNTAX InetAddress
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "The IPv4 address to which this entry's address information
            pertains.
            "
        ::= { h3cIpAddrReadEntry 3 }

    h3cIpAddrReadMask OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The subnet mask associated with the IPv4 address of this
            entry. The value of the mask is an IPv4 address with all the
            network bits set to 1 and all the hosts bits set to 0.
            "
        ::= { h3cIpAddrReadEntry 4 }

    h3cIpAddrReadSourceType OBJECT-TYPE
        SYNTAX INTEGER
        {
            assignedIp(1),
            cluster(2),
            dhcp(3),
            bootp(4),
            negotiate(5),
            unnumbered(6),
            vrrp(7)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate the type of source of the IPv4 address."
        ::= { h3cIpAddrReadEntry 5 }

    h3cIpAddrReadCatalog OBJECT-TYPE
        SYNTAX INTEGER
        {
            primary(1),
            sub(2),
            cluster(3),
            vrrp(4)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Indicate the category of the IPv4 address."
        ::= { h3cIpAddrReadEntry 6 }

    h3cIpv4AddrTable OBJECT-TYPE
        SYNTAX SEQUENCE OF H3cIpv4AddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to configure primary IPv4 address of an
             interface identified by ifIndex."
        ::= { h3cIpAddressConfig 3 }

    h3cIpv4AddrEntry OBJECT-TYPE
        SYNTAX H3cIpv4AddrEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Define the IPv4 address information.
            "
        INDEX { ifIndex }
        ::= { h3cIpv4AddrTable 1 }

    H3cIpv4AddrEntry ::=
        SEQUENCE
        {
            h3cIpv4AddrAddr
                IpAddress,
            h3cIpv4AddrMask
                IpAddress,
            h3cIpv4AddrRowStatus
                RowStatus
        }

    h3cIpv4AddrAddr OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The IPv4 address to which this entry's address information
            pertains.
            "
        ::= { h3cIpv4AddrEntry 1 }

    h3cIpv4AddrMask OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "The subnet mask associated with the IPv4 address of this
            entry.  The value of the mask is an IPv4 address with all the
            network bits set to 1 and all the hosts bits set to 0.
            "
        ::= { h3cIpv4AddrEntry 2 }

    h3cIpv4AddrRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object is used to create a new row or delete an
            existing row in this table, only support active,
            notInService, createAndGo and destroy.
            "
        ::= { h3cIpv4AddrEntry 3 }

--
-- Define the IP Address Traps.
--

h3cIpAddrNotify OBJECT IDENTIFIER ::= { h3cIpAddrMIB 2 }

-- Scalar Objects for Notify
h3cIpAddrNotifyScalarObjects OBJECT IDENTIFIER ::= { h3cIpAddrNotify 1 }

h3cIpAddrNotifyIfIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The IP address IfIndex of specified interface on the device."
    ::= { h3cIpAddrNotifyScalarObjects 1 }

h3cIpAddrOldIpAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The Old IP address of specified interface on the device."
    ::= { h3cIpAddrNotifyScalarObjects 2 }

h3cIpAddrNewIpAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The New IP address of specified interface on the device."
    ::= { h3cIpAddrNotifyScalarObjects 3 }

h3cIpAddrFirstTrapTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "Represents the first trap time."
    ::= { h3cIpAddrNotifyScalarObjects 4 }


-- Notification Objects
h3cIpAddrNotifyObjects OBJECT IDENTIFIER ::= { h3cIpAddrNotify 2 }

h3cIpAddrNotifyObjectsPrefix OBJECT IDENTIFIER ::= { h3cIpAddrNotifyObjects 0 }

h3cIpAddressChangeNotify NOTIFICATION-TYPE
    OBJECTS
        {
            h3cIpAddrNotifyIfIndex,
            h3cIpAddrOldIpAddress,
            h3cIpAddrNewIpAddress,
            h3cIpAddrFirstTrapTime
         }
    STATUS      current
    DESCRIPTION
        "This notification will be generated when the IP address of interface
        is changed.  The change maybe originate from NMS, DHCP server or
        administrator.

        This notification announces useful IP address change.  So it
        is triggered by significative IP address change."

    ::= { h3cIpAddrNotifyObjectsPrefix 1 }

END