A3COM-HUAWEI-IF-EXT-MIB

-- =================================================================
-- Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: interface extension mib
-- Reference: IF-MIB
-- Version: V1.6
-- History:
--   V1.0 created by gaolong
--     Initial version 2004-11-13
--   V1.1 2007-01-13 Modified by wanglirong
--     Add h3cIfStatGlobalFlowInterval and h3cIfSpeedStatTable
--   V1.2 Modified by chenxi
--     Add h3cRTParentIfTable, h3cRTSubIfTable and
--     h3cIfLinkModeTable 2007-10-15
--   V1.3 2009-05-05 Add h3cIfPhysicalNumber, h3cIfTable
--   V1.4 2009-08-08 Add h3cIfMtu, h3cIfBandwidth, h3cIfDiscardPktRate,
--     h3cIfExtTrapCfgTable
--   V1.5 2010-09-04 Add h3cIfInNUcastPkts, h3cIfOutNUcastPkts and h3cIfStatusKeepTime by shuaixj
--   V1.6 2011-09-16 Add h3cIfHCFlowStatTable by xiedong
--        2011-11-04 Add h3cIfIsPoe by duyanbing
-- =================================================================
A3COM-HUAWEI-IF-EXT-MIB DEFINITIONS ::= BEGIN

IMPORTS
        h3cCommon
    FROM A3COM-HUAWEI-OID-MIB
        ifIndex, ifDescr
    FROM IF-MIB
        Integer32, Counter64, Unsigned32, TimeTicks,
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
    FROM SNMPv2-SMI
        CounterBasedGauge64
    FROM HCNUM-TC
        DisplayString, RowStatus, TruthValue
    FROM SNMPv2-TC;

h3cIfExt MODULE-IDENTITY
    LAST-UPDATED "200905061936Z"        -- May 6, 2009 at 19:36 GMT
    ORGANIZATION
        "Hangzhou H3C Technologies Co., Ltd."
    CONTACT-INFO
        "Platform Team H3C Technologies Co., Ltd.
         Hai-Dian District Beijing P.R. China
         http://www.h3c.com
         Zip: 100085"
    DESCRIPTION
        "This MIB is an extension of interface MIBs such as IF-MIB.

        This MIB is applicable to routers, switches and other products.

        Some objects in this may be used only for some specific products,
        so users should refer to the related documents to acquire more
        detail information.
        "
    REVISION "200905061936Z"
    DESCRIPTION
        "Update this MIB module."
    REVISION "200411131936Z"        -- December 13, 2004 at 19:36 GMT
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { h3cCommon 40 }


--
-- Node definitions
--

-- Scalar MIB objects, which are considered as global variables
-- to all interfaces in a device, are defined in this section.
h3cIfExtScalarGroup OBJECT IDENTIFIER ::= { h3cIfExt 1 }

h3cIfStatGlobalFlowInterval OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sampling interval for in/out flow of all interfaces.
        Setting zero indicates closing the statistic function."
    ::= { h3cIfExtScalarGroup 1 }

-- =================================================================
-- All other groups are defined below. Of course, scalar objects can
-- also be defined in a sub section, but they must be one part of
-- that sub section.

-- Note that a scalar group should be defined firstly and all
-- scalar objects are placed under that group when doing so.
h3cIfExtGroup OBJECT IDENTIFIER ::= { h3cIfExt 2 }


-- =================================================================
-- The section below describes statistics of interfaces in a device.
-- These statistics may not be included in standard MIBs.
h3cIfStat OBJECT IDENTIFIER ::= { h3cIfExtGroup 1 }

-- Define a scalar group which consists of all scalar objects used for
-- interface statistics.
h3cIfStatScalarGroup OBJECT IDENTIFIER ::= { h3cIfStat 1 }

h3cIfStatTable OBJECT IDENTIFIER ::= { h3cIfStat 2 }

h3cIfFlowStatTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to get statistic information
        of interfaces on a device."
    ::= { h3cIfStatTable 1 }

h3cIfStatEntry OBJECT-TYPE
    SYNTAX      H3cIfStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry items"
    INDEX
        {
            ifIndex
        }
    ::= { h3cIfFlowStatTable 1 }

H3cIfStatEntry ::= SEQUENCE
    {
        h3cIfStatFlowInterval    Integer32,
        h3cIfStatFlowInBits      Unsigned32,
        h3cIfStatFlowOutBits     Unsigned32,
        h3cIfStatFlowInPkts      Unsigned32,
        h3cIfStatFlowOutPkts     Unsigned32,
        h3cIfStatFlowInBytes     Unsigned32,
        h3cIfStatFlowOutBytes    Unsigned32
    }

h3cIfStatFlowInterval OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sampling interval for in/out flow of interface.
        Setting zero indicates closing this statistic function
        and objects in this table should return 0."
    ::= { h3cIfStatEntry 1 }

h3cIfStatFlowInBits OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In bits in the specific interval."
    ::= { h3cIfStatEntry 2 }

h3cIfStatFlowOutBits OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out bits in specific interval."
    ::= { h3cIfStatEntry 3 }

h3cIfStatFlowInPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In Packets in the specific interval."
    ::= { h3cIfStatEntry 4 }

h3cIfStatFlowOutPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out packets in the specific interval."
    ::= { h3cIfStatEntry 5 }

h3cIfStatFlowInBytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In bytes in the specific interval."
    ::= { h3cIfStatEntry 6 }

h3cIfStatFlowOutBytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out bytes in the specific interval."
    ::= { h3cIfStatEntry 7 }


-- =================================================================
h3cIfSpeedStatTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfSpeedStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to get average speed information
        in the specific interval of interfaces on a device."
    ::= { h3cIfStatTable 2 }

h3cIfSpeedStatEntry OBJECT-TYPE
    SYNTAX      H3cIfSpeedStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry items"
    INDEX
        {
            ifIndex
        }
    ::= { h3cIfSpeedStatTable 1 }

H3cIfSpeedStatEntry ::= SEQUENCE
    {
        h3cIfSpeedStatInterval    Integer32,
        h3cIfSpeedStatInPkts      Unsigned32,
        h3cIfSpeedStatOutPkts     Unsigned32,
        h3cIfSpeedStatInBytes     Unsigned32,
        h3cIfSpeedStatOutBytes    Unsigned32
    }

h3cIfSpeedStatInterval OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sampling interval for in/out flow of interface.
        Setting zero indicates closing this statistic function
        and objects in this table should return 0."
    ::= { h3cIfSpeedStatEntry 1 }

h3cIfSpeedStatInPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average of input packets per second in the specific interval by
        h3cIfSpeedStatInterval."
    ::= { h3cIfSpeedStatEntry 2 }

h3cIfSpeedStatOutPkts OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average of output packets per second in the specific interval by
        h3cIfSpeedStatInterval."
    ::= { h3cIfSpeedStatEntry 3 }

h3cIfSpeedStatInBytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average of input bytes per second in the specific interval by
        h3cIfSpeedStatInterval."
    ::= { h3cIfSpeedStatEntry 4 }

h3cIfSpeedStatOutBytes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Average of output bytes per second in the specific interval by
        h3cIfSpeedStatInterval."
    ::= { h3cIfSpeedStatEntry 5 }

-- =================================================================
h3cIfHCFlowStatTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfHCFlowStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to get statistic information
         of interfaces on a device."
    ::= { h3cIfStatTable 3 }

h3cIfHCFlowStatEntry OBJECT-TYPE
    SYNTAX      H3cIfHCFlowStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry items"
    INDEX
        {
            ifIndex
        }
    ::= { h3cIfHCFlowStatTable 1 }

H3cIfHCFlowStatEntry ::= SEQUENCE
    {
        h3cIfStatFlowHCInBits      CounterBasedGauge64,
        h3cIfStatFlowHCOutBits     CounterBasedGauge64,
        h3cIfStatFlowHCInPkts      CounterBasedGauge64,
        h3cIfStatFlowHCOutPkts     CounterBasedGauge64,
        h3cIfStatFlowHCInBytes     CounterBasedGauge64,
        h3cIfStatFlowHCOutBytes    CounterBasedGauge64
    }

h3cIfStatFlowHCInBits OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In bits in the specific interval.  This object is a 64-bit
         version of h3cIfStatFlowInBits."
    ::= { h3cIfHCFlowStatEntry 1 }

h3cIfStatFlowHCOutBits OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out bits in specific interval.  This object is a 64-bit
         version of h3cIfStatFlowOutBits."
    ::= { h3cIfHCFlowStatEntry 2 }

h3cIfStatFlowHCInPkts OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In Packets in the specific interval.  This object is a 64-bit
         version of h3cIfStatFlowInPkts."
    ::= { h3cIfHCFlowStatEntry 3 }

h3cIfStatFlowHCOutPkts OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out packets in the specific interval.  This object is a 64-bit
         version of h3cIfStatFlowOutPkts."
    ::= { h3cIfHCFlowStatEntry 4 }

h3cIfStatFlowHCInBytes OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "In bytes in the specific interval.  This object is a 64-bit
         version of h3cIfStatFlowInBytes."
    ::= { h3cIfHCFlowStatEntry 5 }

h3cIfStatFlowHCOutBytes OBJECT-TYPE
    SYNTAX      CounterBasedGauge64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Out bytes in the specific interval.  This object is a 64-bit
         version of h3cIfStatFlowOutBytes."
    ::= { h3cIfHCFlowStatEntry 6 }

-- =================================================================

h3cIfControl OBJECT IDENTIFIER ::= { h3cIfExtGroup 2 }

h3cRTParentIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cRTParentIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains all interfaces that can create sub
        interface."
    ::= { h3cIfControl  1 }

h3cRTParentIfEntry OBJECT-TYPE
    SYNTAX      H3cRTParentIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entry describes a interface that can create sub
        interface."
    INDEX
        {
            h3cRTParentIfIndex
        }
    ::= { h3cRTParentIfTable 1}

H3cRTParentIfEntry    ::= SEQUENCE
    {
        h3cRTParentIfIndex      Integer32,
        h3cRTMinSubIfOrdinal    Integer32,
        h3cRTMaxSubIfOrdinal    Integer32
    }

h3cRTParentIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of interface that can creat sub interface.  The value
        is the same as ifIndex value for this interface."
    ::= { h3cRTParentIfEntry 1 }

h3cRTMinSubIfOrdinal OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The minimum ordinal of the sub interface can be created."
    ::= { h3cRTParentIfEntry 2 }

h3cRTMaxSubIfOrdinal OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The max ordinal of the sub interface can be created."
    ::= { h3cRTParentIfEntry 3 }

-- =================================================================

h3cRTSubIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cRTSubIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to create or delete sub interfaces.
        To create a sub interface, a valid parent interface must be
        specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal
        must be in the range between h3cRTMinSubIfOrdinal and
        h3cRTMaxSubIfOrdinal of the parent interface from
        h3cRTParentIfTable.

        Sub interfaces are logical virtual interfaces configured on a
        main interface.  The main interface can be either a physical
        interface (such as a Layer 3 Ethernet interface) or a logical
        interface (such as an MFR interface).  The subinterfaces on a
        main interface share the physical layer parameters of the main
        interface but can have link layer and network layer parameters
        of their own.  Disabling or enabling a subinterface does not
        affect the main interface, but the main interface status change
        affects the subinterfaces.  The subinterfaces cannot operate
        normally unless the main interface is connected.
        A single physical interface containing multiple subinterfaces
        enables you to network in a more flexible way.

        You can create subinterfaces for the following physical
        interfaces:
        Ethernet interface.  An Ethernet subinterface associated with no
        VLAN supports only IPX, while an Ethernet subinterface associated
        with a VLAN supports both IP and IPX.
        WAN interfaces with their data link layer protocols being frame
        relay, whose subinterfaces support IP and IPX.
        WAN interfaces with their data link layer protocols being X.25,
        whose subinterfaces support IP and IPX.
        ATM interface, whose subinterfaces support only IP."
    ::= { h3cIfControl  2 }

h3cRTSubIfEntry OBJECT-TYPE
    SYNTAX      H3cRTSubIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The h3cRTSubIfTable entry items"
    INDEX
        {
            h3cRTSubIfParentIfIndex,
            h3cRTSubIfOrdinal
        }
    ::= { h3cRTSubIfTable 1}

H3cRTSubIfEntry    ::= SEQUENCE
    {
        h3cRTSubIfParentIfIndex    Integer32,
        h3cRTSubIfOrdinal          Integer32,
        h3cRTSubIfSubIfIndex       Integer32,
        h3cRTSubIfSubIfDesc        DisplayString,
        h3cRTSubIfRowStatus        RowStatus
    }

h3cRTSubIfParentIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The parent interface index.  The value should be the same as the
        h3cRTParentIfIndex."
    ::= { h3cRTSubIfEntry 1 }

h3cRTSubIfOrdinal OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ordinal of sub interface.  It should between
        h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent
        interface."
    ::= { h3cRTSubIfEntry 2 }

h3cRTSubIfSubIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ifIndex value of the sub interface"
    ::= { h3cRTSubIfEntry 3 }

h3cRTSubIfSubIfDesc OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the interface"
    ::= { h3cRTSubIfEntry 4 }

h3cRTSubIfRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Operation status."
    ::= { h3cRTSubIfEntry 5 }

-- =================================================================
h3cIfLinkModeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfLinkModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains objects to get or set the link mode of an
        interface.
        According to the layer at which the device processes received
        data packets, Ethernet interfaces can operate in bridge or route
        mode."
    ::= { h3cIfControl  3 }

h3cIfLinkModeEntry OBJECT-TYPE
    SYNTAX      H3cIfLinkModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The interface link mode table entry"
    INDEX
        {
            h3cIfLinkModeIndex
        }
    ::= { h3cIfLinkModeTable 1}

H3cIfLinkModeEntry    ::= SEQUENCE
    {
        h3cIfLinkModeIndex            Integer32,
        h3cIfLinkMode                 INTEGER,
        h3cIfLinkModeSwitchSupport    TruthValue
    }

h3cIfLinkModeIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value is same as ifIndex."
    ::= { h3cIfLinkModeEntry 1 }


h3cIfLinkMode OBJECT-TYPE
    SYNTAX      INTEGER
        {
            bridgeMode(1),
            routeMode(2)
        }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The current link mode of the interface
        If h3cIfLinkModeSwitchSupport is true, writing to the object can
        change the link mode of the interface."
    ::= { h3cIfLinkModeEntry 2 }

h3cIfLinkModeSwitchSupport OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Whether the interface supports link mode switching.
        If this object is true, the interface can operate in either
        bridge mode or route mode.  Otherwise the interfaces can operate
        only in bridge or route mode."
    ::= { h3cIfLinkModeEntry 3 }

h3cIfInterfaces OBJECT IDENTIFIER ::= { h3cIfExtGroup 3 }

h3cIfPhysicalNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Represents the number of physical interfaces in the device."
    ::= { h3cIfInterfaces 1 }

h3cIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of interface entries.  The number of entries is given by
         the value of IfNumber."
    ::= { h3cIfInterfaces 2 }

h3cIfEntry OBJECT-TYPE
    SYNTAX      H3cIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing management information applicable to a
         particular interface."
    INDEX
        {
            ifIndex
        }
    ::= { h3cIfTable 1 }

H3cIfEntry ::= SEQUENCE
    {
        h3cIfUpDownTimes      Integer32,
        h3cIfMtu              Integer32,
        h3cIfBandwidthRate    Integer32,
        h3cIfDiscardPktRate   Integer32,
        h3cIfStatusKeepTime   TimeTicks,
        h3cIfInNUcastPkts     Counter64,
        h3cIfOutNUcastPkts    Counter64,
        h3cIfIsPoe            TruthValue
    }

h3cIfUpDownTimes OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The interface's up/down times, since the device was initialized."
    ::= { h3cIfEntry 1 }

h3cIfMtu OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The size of the largest datagram which can be sent/received on the
        interface, specified in octets.  For interfaces that are used for
        transmitting network datagram, this is the size of the largest network
        datagram that can be sent on the interface."
    ::= { h3cIfEntry 2 }

h3cIfBandwidthRate OBJECT-TYPE
    SYNTAX      Integer32(0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The rate of the bandwidth for an interface."
    ::= { h3cIfEntry 3 }

h3cIfDiscardPktRate OBJECT-TYPE
    SYNTAX      Integer32(0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The rate of the discarded packets for an interface."
    ::= { h3cIfEntry 4 }

h3cIfStatusKeepTime OBJECT-TYPE
    SYNTAX      TimeTicks
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time since the interface
        entered its current operational state."
    ::= { h3cIfEntry 5 }

h3cIfInNUcastPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of non-unicast (i.e., subnetwork-
        broadcast or subnetwork-multicast) packets
        delivered to a higher-layer protocol."
    ::= { h3cIfEntry 6 }

h3cIfOutNUcastPkts OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of packets that higher-level
        protocols requested be transmitted to a non-
        unicast (i.e., a subnetwork-broadcast or
        subnetwork-multicast) address."
    ::= { h3cIfEntry 7 }

h3cIfIsPoe OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Whether the interface supports poe."
    ::= { h3cIfEntry 8 }

--
-- Notification definitions
--
-- =================================================================
-- Traps are defined below.

h3cIfExtTrap OBJECT IDENTIFIER ::= { h3cIfExt 3 }
h3cIfExtTrapPrex OBJECT IDENTIFIER ::= { h3cIfExtTrap 0 }
-- All trap definitions should be placed under this object.

h3cIfBandwidthUsageHigh NOTIFICATION-TYPE
    OBJECTS
        {
            ifDescr,
            h3cIfBandwidthRate,
            h3cIfBandwidthUpperLimit
        }
    STATUS current
    DESCRIPTION
        "The notification is generated when the rate of the bandwidth for the
         interface exceeds the upper limit."
    ::= { h3cIfExtTrapPrex 1 }

h3cIfDiscardPktRateHigh NOTIFICATION-TYPE
    OBJECTS
        {
            ifDescr,
            h3cIfDiscardPktRate,
            h3cIfDiscardPktRateUpperLimit
        }
    STATUS current
    DESCRIPTION
        "The notification is generated when the rate of the discarded packets
         for the interface exceeds the upper limit."
    ::= { h3cIfExtTrapPrex 2 }

h3cIfExtTrapObject OBJECT IDENTIFIER ::= { h3cIfExtTrap 1 }

h3cIfExtTrapCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF H3cIfExtTrapCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The trap configuration table."
    ::= { h3cIfExtTrapObject 1 }

h3cIfExtTrapCfgEntry OBJECT-TYPE
    SYNTAX      H3cIfExtTrapCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry for this table."
    INDEX
        {
            ifIndex
        }
    ::= { h3cIfExtTrapCfgTable 1 }

H3cIfExtTrapCfgEntry ::= SEQUENCE
    {
        h3cIfBandwidthUpperLimit      Integer32,
        h3cIfDiscardPktRateUpperLimit Integer32
    }

h3cIfBandwidthUpperLimit OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The rate of the bandwidth upper limit for an interface."
    ::= { h3cIfExtTrapCfgEntry 1 }

h3cIfDiscardPktRateUpperLimit OBJECT-TYPE
    SYNTAX      Integer32(1..100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The rate of the discarded packets upper limit for an interface."
    ::= { h3cIfExtTrapCfgEntry 2 }

END